Failure Warning Signs of excavator swing bearings

If the excavator swing bearing is defective, the machine cannot be used. A simple warning signal for the failure of a swing bearing (usually referred to as a rotating ring).

One of the most important components of an excavator is the swing bearing(excavator swing bearings).

The obvious sign of excavator swing bearing failure is the condition of the lubricant. If you see metal particles and thin sheets in the liquid, you will notice that they have suffered severe wear and tear.

Another danger signal is the grinding, cracking or clicking noise of the bearings. This type of noise usually indicates the need to lubricate the swing bearings or excessively wear the rails.

If there are too many competitions and sports, there may be too many warnings for the track. As the distance between bearing and rack increases, wear usually accelerates. Then you really need to focus on the functionality of the machine.

Increasing the torque or combination may indicate uneven wear of the magnetic track. If the torque of the bearing increases significantly or the bearing is tightened, this usually means that the load is uneven. Especially if the arms are fully stretched out, you may notice trembling and trembling movements.

Another warning signal is the situation of the vibration resistance or the upper structure exceeding the expected stop point.

The most obvious and biggest warning signal is the situation of bearing breakage and breakage during machine excavation. Once you've achieved that, it's time to buy new bearings.

Watch these warning signals. Proper maintenance can prevent excavator swing bearings from malfunctioning and prevent hands from rotating. If you need a new rotating ring, the price is not cheap, but replacing it with a new swing bearing can save a lot of money. We have a new rotating journal at a price of about half the purchase price from a retailer.

Do you need excavator swing bearings? Please do not hesitate to contact me at any time.